Tethered shooting software hs v5 for windows
ПО для синхронизации камеры с компьютером «HS-V5 для Windows® Вер. 1.0»
Программное обеспечение для подключения камеры к компьютеру, для камер FUJIFILM X-T1/X-T1 GraphiteSilverEdition
Рекомендованная цена: 5 999 руб.
Корпорация Fujifilm объявляет о старте продаж нового ПО HS-V5 для Windows Ver. 1.0, предназначенного специально для камерFUJIFILM X-T1 и FUJIFILM X-T1 GraphiteSilverEdition, которое позволяет загружать снимки на компьютер в реальном времени. Начало продаж 16 февраля 2015 года.
«HS-V5 для Windows Вер.1.0» — этоспециальное ПО, благодаря которому владельцы моделей X-T1*1 и X-T1 GraphiteSilverEdition*1 смогут подключать свои камеры к компьютеру, сохранять созданные фотографии прямо на жесткий диск, а также управлять камерой дистанционно со своего компьютера. Для подключения камеры к компьютеру используется кабель USB 2.0*2.
(1) Два режима съемки: «Камера» и «ПК» (для управления процессом съемки с камеры и компьютера соответственно)
В режиме «Камера» пользователи осуществляют съемку и меняют настройки непосредственно на самой камере, держа ее в руках или закрепив на штативе. Сделанные снимки в реальном времени передаются на компьютер, где их можно просмотреть или сохранить. Настройка экспозиции и других параметров съемки, спуск затвора и прочие операции выполняются непосредственно на камере.
В режиме «ПК» пользователи могут дистанционно просматривать изображение, видимое в видоискателе, управлять камерой и менять настройки со своегокомпьютера; при этом у них есть возможность просмотреть сделанные снимки или сохранить их на жесткий диск. Настройка экспозиции и других параметров съемки, спуск затвора и прочие операции выполняются с компьютера.
Hyper-Utility3 позволяет пользователям просматривать изображения, сохраненные на компьютере.
Программа включает следующие функции: анализ изображения с помощью гистограмм, предупреждения о резких границах и отображение данных EXIF; оценка изображения путем сравнения двух его вариантов; и организация/присвоение категории на основе специальных маркеров.
*1Прошивка должна быть обновлена до версии, поддерживающей подключение к компьютеру (3.0 или более поздней). Для загрузки совместимой прошивки требуется подключение к Интернету.
*2Для подключения камеры к компьютеру необходимо использовать кабель USB2.0 MicroB.
*3Hyper-Utility3 не поддерживает файлы RAW, созданные с помощью камер серии Х, а также S100FS, S200EXR, S205EXR, HS10, HS20EXR, HS22EXR, HS30EXR, HS33EXR, HS35EXR, HS50EXR, F505EXR, F550EXR, F600EXR, F605EXR, F770EXR, F775EXR, F800EXR, F900EXR, SL1000 и FinePix S1. Пожалуйста, используйте поставляемое с камерой ПО RawFileConverter EX PoweredbySilkyPix.
Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®
Windows Version: 1.13.0
Last Updated: 11.01.2018
Last Updated: 11.01.2018
Overview
This software is to make an installer of Tether Capture Plug-in for Adobe® Photoshop® Lightroom® to cameras below.
* After May 31, 2019, Fujifilm will no longer provide camera compatibility upgrade or OS support for HS-V5 and related software including the Plug-in.
* To use “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®”, Windows PC installed with “Tethered Shooting Software HS-V5 for Windows®” is required.
* To use “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” you need to purchase “Adobe® Photoshop® Lightroom® 5 or 6”.
* “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” is compatible with cameras below. If your camera is old version of firmware upgrade it.
* For customers who don’t have the HS-V5, “FUJIFILM Tether Shooting Plug-in” is available for purchase at Adobe Exchange site.
Notes
Please read this update after refreshing this page.
Detail of the software update
The software update Ver.1.13.0 incorporates the following issues:
The compatibility of tethered shooting with «FUJIFILM GFX 50R» is added.
The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.
Compatibility with “macOS Mojave” is added.
If you use a Mac with “macOS Mojave”, install the latest version(1.13.0) of the ”Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®”.
The software update Ver.1.10 from Ver.1.7 incorporates the following issue:
In case that the File Type (JPEG or RAW) to be transferred selected in the software is not selected in the IMAGE QUALITY menu in a camera, the message will appear on a PC screen.
For example, in case that only “JPEG” is selected in the software, but the IMAGE QUALITY “RAW” is selected is in the camera, the message of “No image is transferred. Check the IMAGE QUALITY menu settings of camera.” appears.
The software update Ver.1.7 from Ver.1.6 incorporates the following issues:
The compatibility of tethered shooting with «FUJIFILM X-H1» is added.
The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.
Compatibility with new functions of X-Pro2 (firmware version 4.00) is added, which are tether shooting via USB or Wi-Fi and backup/restore of camera settings.
*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.
The software update Ver.1.6 incorporates the following issues:
Tether shooting is available by wireless communication for GFX 50S and X-T2
*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.
For detail, visit the URL below.
* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual
How to set:
The software update Ver.1.4 incorporates the following issues:
The compatibility of tethered shooting with «FUJIFILM GFX 50S» is added.
FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.
It has become compatible with macOS Sierra.
The software update Ver.1.2 incorporates the following issues:
Storage of image data both to PC and SD card on PC shooting.
Image data can be stored both to PC and SD card in a camera connected to PC on every PC shooting. And it is possible to choose the destination to store (PC or SD card) for each of JPEG data and RAW data in case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW”.
[How to set]
Choice of the destination becomes available by clicking an “X” icon on the menu bar of MacOSX or on the task tray of Windows. (See the images below.)
*The firmware of FUJIFILM X-T1 needs to be upgraded to version 4.30 or later.
White Balance setting of the camera can be indicated.
How to Install
*When installing “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” Ver.1.10 to a Mac OS PC, please copy the installer “FUJI_PLUGIN.pkg” to the Mac PC beforehand. Double-click it and follow the on-screen instructions.
System Requirements
Download
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.
Article 1. License
SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Tethered Shooting Software HS-V5 for Windows®
Windows Version: 1.12.0
Last Updated: 29.11.2018
Overview
Only the user who has CD-ROM “Tethered Shooting Software HS-V5” can use this updater.
This updater updates Tethered Shooting Software HS-V5 for Windows® to its latest version.
* To use the software, you need a Windows PC installed with “Tethered Shooting Software HS-V5 Ver.1.1 – Ver.1.7”
* After May 31, 2019, Fujifilm will no longer provide camera compatibility upgrade or OS support for HS-V5.
Notes
Please read this update after refreshing this page.
Detail of the software update
The software update Ver.1.12.0 incorporates the following issue:
The compatibility of tethered shooting with «FUJIFILM GFX 50R» is added.
The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.
The software update Ver.1.11.0 from Ver.1.8 incorporates the following issue:
The compatibility of tethered shooting with «FUJIFILM X-T3» is added.
The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.
The software update Ver.1.8 from Ver.1.7 incorporates the following issue:
The compatibility of tethered shooting with «FUJIFILM X-H1» is added.
The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.
The software update Ver.1.7 from Ver.1.6 incorporates the following issue:
*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.
*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.
The software update Ver.1.6 from Ver.1.4 incorporates the following issues:
Tether shooting is available by wireless communication for GFX 50S and X-T2
*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.
For detail, visit the URL below.
* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual.
BACKUP & RESTORE function is added in USER SETTING for Tether shooting function.
When Tether Shooting Software HS-V5 is used, this function can save all camera settings as a file and restore the setting from a stored setting. Therefore, you can change the camera settings at a moment and copy them to multiple cameras.
*This function can be used with X-T1 ver.5.20 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.
X-T1 Camera Body Firmware
Edit this Imaegs.
The software update Ver.1.4 from Ver.1.3 incorporates the following issues:
The compatibility of tethered shooting with «FUJIFILM GFX 50S» is added.
The software update Ver.1.3 from Ver.1.2 incorporates the following issues:
FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.
X-T2 Camera Body Firmware Update
The features of HS-V5 with X-T1 and with X-T2 are different.
Please refer the document below in detail.
[Quick Start Guide Errata] *Description in the [ ] is for menu name of X-T2
USB MODE/[PC SHOOT MODE]
The available modes are described below (the options availability may differ depending on the camera).
Select MTP(PTP)/ [OFF] or PC SHOOT AUTO/[USB AUTO] when not using HS-V5.
The software update Ver.1.2 incorporates the following issues:
On PC shooting, image data stored both to PC and SD card can have the same file name.
On PC shooting, image data stored both to PC and SD card can have the same file name.
In case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW” and the destinations to store (PC or SD card) for each of JPEG data and RAW data are divided, each data can have the same name except for file extension.
[How to set]
Click setting button on upper right of the window and select “Save File Name” > “Original filename”.
*Initial setting of “Save File name” just after the upgrade is “Original filename”.
*The firmware of “FUJIFILM X-T1” needs to be upgraded to version 4.30 or later.
Addition of compatibility with firmware version 4.00 of X-T1.
This update enables you to use the functions below.
How to Install
System Requirements
OS * | Windows 10 (x86/x64), Windows 8.1 (x86/x64), Windows 7 SP1 (x86/x64) |
---|---|
CPU | Intel Pentium® processor-based PC or compatible computer. (Core 2 Quad or later is recommended) |
RAM | 2GB or later is recommended |
* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guaranteed on home-built PCs or PCs that have been upgraded from earlier versions of Windows.
Download
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.
Article 1. License
SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Download
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.
Article 1. License
SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Tethered shooting software hs v5 for windows
Обновление приложения для ios планируется? Кто может ответить на этот вопрос?
Что за синхронизация с компом? Через плагин для лайтрума?
Да там из всего списка проблем, только проценты батарейки по отчетам поправили. Завтра полностью посмотрю.
Косяки фуджи на уровне прошивки X-T2
— [ ] Две кнопки меню на задней панели в режиме просмотра фотографий. Одна это кнопка меню, вторая это джойстик. Нет возможности отключить или переназначить на нажатие джойстика другие функции, к примеру увеличение фотографии, место нажатия на заднее колесо.
Показать полностью.
— [ ] Нет выбора режимов при USB подключении. Доступен только режим PTP. Фотографии просто без использования программ не перекинуть.
— [ ] Нет увеличения фотографии при просмотре до масштаба 1 к 1 в режиме съемки только в RAW. Просмотр возможен только в режиме RAW+jpeg. Какой смысл тратить треть карты памяти на ненужные JPEG файлы? Нужные можно по Q-Q-OK наделать позже.
— [ ] Отображение заряда батареи в процентах доступно только в режиме просмотра фотографий на экране с дополнительной информацией. Сказки про то, что на основном съемочном экране нет для этого места, просто сказки.
— [ ] Нет отображения статуса зарядки по USB если камера включена. Необходимо иконку батарейки подсвечивать цветом или значок показывать, что заряжается во время работы.
— [ ] Включенный режим распознавания лиц отключает полностью фазовую фокусировку. Не верю, что для этого нет ресурсов процессора. На камерах сони ничего не отключается и детектив как надо.
— [ ] Нет режима с захватом и удержанием объекта в фокусе при самой широкой зоне фокусировки, чтобы внутри этой зоны можно было двигать точку разного размера и при захвате объекта по ней, точка могла двигаться внутри широкой зоны, удерживая объект. Такое было даже на древних сони некс 4 года назад.
— [ ] При съемке в зональном режиме и следящей фокусировке нет возможности навестишь и начать отслеживать объект к примеру по лицу + крестиком внутри этой зоны и чтобы он по крестику и старался фокусироваться далее. Сейчас же фокус цепляется где попало внутри этой зоны и как попало его ведет, в фокусе могут оказаться и голова, и вытянутые руки и другие передметы. Нужна настройка избирательности удержания точки внутри зоны.
— [ ] В видео режиме нет возможности нормально использовать перефокусировку при зонном типе фокуса с одного объекта на другой. Фокус уезжает на фон при перемещении. Можно было бы решить эту проблему кнопкой AF-L, но при ее нажатии блокируется не только фокусировка, но и перемещение зоны фокуса. Нужно разблокировать перемещение зоны фокуса в режиме блокировки фокусировки.
— [ ] Нет возможности выставить задержку съемки в секундах в режиме интервальной съемки, не путать с режимом селф-таймера. съёмку можно начать или сразу или через минуту, не хочу я ждать минуту, мне и 15-20 секунд хватит. В любом дешевом внешнем интервалометре есть задержка в секундах.
— [ ] В режиме интервалометра добавить опциональную возможность включить индикацию съемки светодиодом спереди, как это есть в режиме селф-таймера.
— [ ] Если в камере установлен режим съемки видео в 4к или FullHD, а вы включили видеозапись через приложение для телефона, то итоговое видео будет в формате 720p. Ни оговорок в инструкции, ни предупреждений в приложении нет.
— [ ] В режиме Авто ИСО отображается только максимальное исо.
— [ ] Невнятное отображение счетчика сделанных-оставшихся кадров в режиме съемки и в режиме просмотра.
— [ ] Добавить выключение предпросмотра экспозиции-баланса белого на экран быстрых настроек, для съемки в студии очень как запаривает лазить в пользовательское меню на 3 уровня вглубь
Fujifilm Announces PC Tethered Shooting Software HS-V5
Posted by: Josh on Nov 20, 2014
A new PC Tethered Shooting Software HS-V5 for Windows® Ver. 1.0 will feature two modes, Camera Mode and PC Mode, giving photographers enhanced shooting controls.
Within the PC Tethered Shooting Software, Camera Mode allows users to operate the camera and adjust its settings on the camera itself, with images taken simultaneously transferred to computer for display on the screen or saving on a PC. Adjusting exposure and other shooting settings, along with activating the shutter release, are carried out on camera. Alternatively, users can switch to PC Mode where they can check the viewfinder image of a remotely-setup camera, operate the camera and adjust its settings on a PC screen, with images taken simultaneously transferred to a PC for display on the screen or saving onto a PC. Adjusting exposure and other shooting settings, or activating the shutter release, are carried out remotely on the computer.
PC Tethered Shooting Software HS-V5 also includes the Hyper-Utlity3 image browser for easy image viewing, analysis, assessment, categorization and organization. It features an image analysis function using the histogram, highlight clipping warning and EXIF data (including Film Simulations, exchangeable LENS name, and more) and displays an “image assessment” function that shows two images side-by-side for comparison.
PC Tethered Shooting Software HS-V5 will be available in January 2015.
Here is a list other popular tethering software options to explore.
Search Blogs
Categories
Free Tethering Guides
30 amazing female photographers share their inspiration, challenges, process and final shots in the Women’s Edition of How I Got the Shot Guide.
Download the Ultimate Tethering Guide and create better images and work more efficiently shooting tethered
Download the Better When You Tether Guide featuring behind the scenes articles from professional photographers
Go behind-the-scenes with fifteen photographers including Scott Kelby, Rossella Vanon, and Vanessa Joy in the How I Got the Shot Educational Guide – Third Edition.
Twelve photographers including Jeremy Cowart, John David Pittman, and Easton Chang pull back the curtain on their latest shoot in the How I Got the Shot Educational Guide – Second Edition.
Learn how ten photographers including Lindsay Adler, Clay Cook, and Karen Alsop, connect, collaborate, and create in the How I Got the Shot Educational Guide – First Edition.
Stay Connected
Stay connected with our monthly newsletter and be the first to know about new product releases, deals and special industry events