Isdx err bad windows version entry not found in the string table

Isdx err bad windows version entry not found in the string table

[center] Mass Effect
Жанр: Action / RPG
Разработчик: «BioWare Corporation»
Издатель: «Electronic Arts»
Издатель в России: «1С/SnowBall Studios»
Дата оф. релиза: 28 мая 2008 года (США) и 6 июня 2008 года (Европа)
Дата оф. релиза в России: 6 июня 2008 года
Официальный сайт: masseffect.bioware.com
Официальный русский сайт Mass Effect

— Игра скачанная/купленная пиратка и в ней не работает Галактическая карта и вместо неё черный экран. Что делать?
— Купить лицензию, либо найти новый кряк, это проблема пиратской версии игры.

— Где находятся сохранения игры?
— (ХР) C:\Documents and Settings\. \Мои документы\BioWare\Mass Effect\Save

— Поддерживает ли игра геймпады?
— Официально игра их не поддерживает. Можно попробовать подключить его через сторонние программы, либо попробовать способ, который приведен ниже:

— Вылетает с такой ошибкой, что можно сделать?

— Следует обновить библиотеки Microsft Visual C++

— При запуске вылетает такая ошибка: «Warning, Shader compile error: error X3501: ‘SM2Main’: entrypoint not found».
— Ваша видеокарта не поддерживает требуемую игрой версию пиксельных шейдеров.

— Возникают проблемы со звуком в игре (не слышно голосов, шипит, похрипывание и т.п.)
Можно попробовать следующее:

2) Установить патч 1.02;

3) Обновить библиотеки библиотеки OpenAL до версии 6.14.0357.24 (с игрой идет более старая 6.14.0357.22):
— Скачать инсталлятор Open AL;
— установить OpenAL;
— перекинуть OpenAL32.dll из Х:\. \WINDOWS\system32 в Х:\. \Mass Effect 2\Binaries;

— У меня «Золотое Издание», установил игру с английской озвучкой и субтитрами. Как сделать на русском только текст и субтитры?
— Установлена может быть любая версия (русская или английская):
1) Открываем файл «»папка с игрой»\BioGame\Config\DefaultEngine.ini» и изменяем строку Language=RA(INT) на Language=RU
2) Копируем файл «»папка с игрой»\BioGame\CookedPC\Packages\Localised\RA\Dial og\GlobalTlk_RA.upk» в «»папка с игрой»\BioGame\CookedPC\Packages\Localised\RU\Dial og\»
3) Переименовываем полученный файл в GlobalTlk_RU.upk

— Установил себе аддон «Гибель с Небес», который шел в комплекте с патчем 1.01 (игра не «Золотое Издание). В миссии по спасению Лиары на планете Террум отсутствуют текстуры земли, что можно сделать?
— Обновить игру патчем 1.02 (размер патча 1.22 ГБ)
— Если не хотите ставить патч, то может помочь удаление файла LocalShaderCache-PC-D3D-SM3.upk из двух мест:

— Обновление убирает систему защиты игры и позволяет играть без диска;

— Размер патча, обусловлен тем, что системой защиты от копирования был зашифрован не только экзешник, а еще и часть игровых ресурсов (весь звук). Т.к. в патче защита снята, то он обновляет часть ресурсов игры, новыми данными, не зашифрованными Старфорсом, отсюда и такой его размер;

— Патч содержит в себе также поправленный аддон «Гибель с Небес» (не будут глюков с текстурами на планете Террум (миссия по спасению Лиары);

— Список изменений, вносимый патчем в игру, аналогичен списку патча v1.02 для «Mass Effect: Золотое издание».

Разное:
— Установив драйвер GeForce 182.06 и выше, можно исправить ошибку, при которой у владельцев видеокарт NVIDIA GeForce 8xxx выводилось сообщение General Protection Fault при запуске игры.
Прежде чем играть в Mass Effect, удостоверьтесь, что на вашем компьютере установлены драйверы последних версий.

Источник

ISDX_ERR_BADWINDOWSVERSION entry not found in the string table

How can I fix this problem so I can play my games

Until solve us the problem I need more information on the issue.

· What is the operating system installed on the computer?

· Does this happen by doing a game online or playing games on the computer?

· This occurs when installing or playing?

· This happens with all games or any game in particular?

· Have you been able to play the same games earlier on the same computer?

However, if this happens all in installing or playing the game installed, you can try to install the game in compatibility mode and check if it works very well.

Access the link below and follow the steps to install in compatibility mode.

Note This article applies to Windows Vista and the same steps remains valid for Windows 7.

I hope this helps. Let us know the result.

Thank you and best regards,

Srinivas R

Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Similar Questions

Hello
Through workflow in the absence of information is approved and made its appearance in the per_absence_attendances table.
I would now like to return path and want to identify the workflow id is to say ITEM_KEY and all its notifications.

Note that leave the related data is not present in the HR_API_TRANSACTION table once the report is approved.

where oracle to store all this information?

Once the transaction is complete, details are then moved to pqh tables. He is the type of a table in the back for the hr_api_tranasactions. No purging of workflow tables does not affect pqh tables

I use Norton Security Suite. Can not think of all recent downloads.

Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.

Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.

Do not remove personal data during the uninstallation.

It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

You need not create a new profile, which is not required on this issue.

need help

ToUCam Pro 11 pcvc840 not install

ToUCam Pro 11 pcvc840 not install

It’s an instance of vista installation

Try the repost in forum hardware

Walter, the time zone traveller

I tried to fix this error: » iexplore.exe: point of entry not found.» The procedure entry point SpoolerInit be found in the dynamic link WINSPOOL library. DRV «but could not find anything useful. He was 4-5 months because I’m having this error message appears whenever I start my laptop. It would really help if someone help me with this. I use Windows 7.

Original title: iexplore.exe error

Thanks for posting your query in Microsoft Community.

I understand that you are facing this problem, for some time.

I’ll try my best to help you in the matter of fixing.

But I would like to know some information to help you better.

(1) where do you get this error message?

(2) that you get this message while accessing any program or Internet Explorer?

(3) don’t you make changes before this problem?

(4) have you any questions of access to the Internet through Internet Explorer?

At the same time, I suggest you follow the following suggestions to solve the problem.

Method 1: I wish that you start the computer in safe mode and then try to check the question because, in safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

Step 1: See the link to start in safe mode.

Startup options (including safe mode).

Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

How to perform a clean boot in Windows

Note: See «How do I reset the computer to start normally after a boot minimum troubleshooting» to prepare the computer to start as usual after a repair .

Additional information:

Install Windows updates in Windows 7

I hope this helps. Otherwise, feel free to write us again with the required information and we will be happy to help you.

Hi, we get this error in an independent ADR on Grizzly implemented.

August 14, 2014 09:59:05

WARNING: The pool_config view or a table has not been found in the schema:

Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

GRAVE: JDBCException [kind = NO_DATA]

JDBCException [kind = NO_DATA]

defaults.xml «XXXXX» designate removed for safety, front of post

saved on Mon Aug 04 16:25:09 EDT 2014

August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

INFO: Using the configuration file: / u00/home/oracle/ords/ords

Configuration properties for: apex

cache. Caching = false

cache. Directory = / tmp/apex/cache

cache. Duration = Days

DB. HostName = XXXXXXXXXXXXXXXXXXX

JDBC. DriverType = thin

JDBC. InactivityTimeout = 1800

JDBC. InitialLimit = 3

JDBC. MaxConnectionReuseCount = 1000

JDBC. MaxStatementsLimit = 10

log. Logging = false

DB. UserName = APEX_PUBLIC_USER

August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

INFO: Oracle REMAINS initialized data Services

Version of REST Data Services Oracle: 2.0.8.163.10.40

The Oracle Data Services REST server info: Grizzly/1.9.49

August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

Configuration properties for: apex_al

cache. Caching = false

cache. Directory = / tmp/apex/cache

cache. Duration = Days

DB. HostName = XXXXXXXXXXXXXXXXXXX

JDBC. DriverType = thin

JDBC. InactivityTimeout = 1800

JDBC. InitialLimit = 3

JDBC. MaxConnectionReuseCount = 1000

JDBC. MaxStatementsLimit = 10

log. Logging = false

DB. UserName = APEX_LISTENER

August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

GRAVE: JDBCException [kind = NO_DATA]

JDBCException [kind = NO_DATA]

to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

to oracle.dbtools.common.jdbc.JDBCResultRowIterator. (JDBCResultRowIterator.java:29)

DBA has forgotten to run apex_rest_config.sql Doh!

Lately has been a problem with my computer. I think that maybe the graphics card is wrong.

Still under warranty

Everything is the same

Upgrade to Windows 10

The first time it happened I was listening to music on Pandora while working in the room. I look above on my HP screen it say «Signal entry not found» screen will sleep mode but I couldn’t ehre still play music. I repeated press ENTER, but he wouldn’t return. After several reboots, the screen came back to the top.

Recently happened during the game World OF Tanks. What’s happened is that my speakers are beginning to make a buzzing sound. He is yet to come of the audio, but it is really low. I then restart my computer to see if that solves the snoring. The HP logo appears and windows 10 thing round runs below it. Then my screen turns off and says ‘not found input Signal. I repeated press ENTER, but it is not. I reboot and still the same thing happens, restart again and it’s same thing, once again, but this time it starts normally. Once rebooted Windows speak it sound goes.

Last night I was playing WOT and the same thing happened with the speakers hum. I went to restart and got the white screen with the ‘not found input Signal. I hit enter but he wouldn’t do anything. I restart 3 times and still the same problem and the snoring has not disappeared while the screen was blank. I unplugged my power and the HDMI from the screen. I got out my old screen and hung up and that the screen worked fine and I’ve been to my login screen. Then I logged. Then I unplugged my old screen and hung to the top of my screen and my screen was now working well and rose windows.

I’m tired in making sure that the HDMI is secured to the back of the tower and when I wiggled it my speakers started to hum again. I left if go and after awhile the snoring got quieter.

I opened the tower and my graphics card fan works well, and there is no dust.

I’ve updated all my drivers with «Drive Booster» and they are all up to date.

Thank you for product information.

What is likely to happen, it’s that, as is all too typical, that the UPGRADE of Win10 have not installed the drivers for your video card, so that Windows can not see properly.

The bad news is that HP provides several other different, and I have no way to know which driver is made to your machine because I have no way of knowing what video hardware, he has in him.

If you look in Control Panel-> Device Manager and there it says that you have the hardware, then you will know which driver to download and install.

1. what operating system is installed on the computer?

2. you are the administrator of the computer?

I suggest you to check and to provide us with the information about the installed operating system.

Step 1:

You can open the administrator and verify if you can open Windows Easy Transfer correctly.

You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.

Step 2:

An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that «the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message «resource protection Windows not found any breach of integrity».
e. once the scan is finished, close the command prompt window, restart the computer and check.

Sorry for the ridiculously long title, but that is exactly the error I get. When I contacted my friends @ Skype that they just told me it’s associated windows problem. I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I’m absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure.

Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

Please note that the thread referenced in ‘Question (1)’ has been marked as the answer by a moderator, and not by the person who asked the question. It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you’re welcome to try these things.

Uninstall and reinstall of Skype as suggested in «Question 2» would have been my first guess, but a bit of searching online suggests that it also assisted. Again, try if you wish. When you uninstall Skype, you will not lose your contacts.

Research online, I’ve mentioned suggests that the problem is caused by software Kies from Samsung. You have this installed on your system? If so (or even if not), go to C:\Windows\system32 and rename avrt.dll. You can call it avrt.dlX or something else you like. Reset. Let us know if that fixes the problem. If it didn’t, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

Original title: ntdll.dll error at boot fruity loops.

Hello
I suggest you contact support FL. I couldn’t find all of the resources for this program.
Eddie B.

What is apsGetReady? Do I need? If yes how can I do? If this is not the case, how can I remove the window error message.

Wzcsldr2.exe found entry point

the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

1. When you receive this error message?
2. you did it before the issue of any material changes or software?
3. what service pack and antivirus are installed on your system?
4. What is the brand and model of the router you are using to connect to the Internet/network

5 are you facing problems to connect to the Internet or to the network?

6. are you using any third-party wireless / network in the System Manager software?

Method 1:

Step 1: Boot your system in ‘Safe Mode with networking’ and check if you get the same error message. Then review the article mentioned below to do so:
A description of the start in Windows XP Mode options:
http://support.Microsoft.com/kb/315222

Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
http://support.Microsoft.com/kb/310353
Important: After you use the clean boot in order to solve your problem follow the steps in the «steps to configure Windows to use a Normal startup state» section to start your system in normal mode.

Method 2: Please see Using D-Link, if you use D link router.
http://www.Dlink.com/support/default.aspx

original title: procedure entry point SetD | DirectoryW

is not found in the KERNEL32.dll dynamic link library

When you receive this error message? How long have you encountered this message? Here is a link that I hope will help solve this problem. Please let us know status.

Microsoft KB:

Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

Hope this review helps you. Let us know anyway. Make it a great day!

«In the end the love you take is equal to The Love You Make» (The Beatles last song from their latest album, Abbey Road.)

The procedure entry point UXCore.dll! [email protected]@[email protected] is not found in the library of dynamic links UXCore.dll. What can I do to resolve this problem in Windows Live Mail?

See if trhis is useful:

AppleSyncNotifier.exe is part of ITunes, I would suggest you download and reinstall iTunes from here http://www.apple.com/itunes/download/

It might help to solve your problem

You can also get in touch with support for ITunes.

Welcome to iTunes Support

Maybe you are looking for

have a new satellite P-55W-C, 10 House windows. went into the bios or UEFI, probably bad letters, but I arrived and passed under the special function keys to the standard, which should be when I press the f11 key, it should mute or reactivate the sou

A «Facebook Prize winner» frozen safari. Everyone knows this, or know a solution?

I’ve been programming Labview for a total of two days so please bear with my inexperience. I have a 9201 module that takes a reading of the voltage and it is plotted on a graph. I click on a Boolean switch and the graph starts playback and recording

Hello, I recently bought a new GPU for my pc, but curiously when I plug my power on my card the PC does not start. The card works fine on other PC and I tried different supplies as well. As a last hope, I am looking to update my BIOS to see if this w

Источник

Isdx err bad windows version entry not found in the string table

[center] Mass Effect
Жанр: Action / RPG
Разработчик: «BioWare Corporation»
Издатель: «Electronic Arts»
Издатель в России: «1С/SnowBall Studios»
Дата оф. релиза: 28 мая 2008 года (США) и 6 июня 2008 года (Европа)
Дата оф. релиза в России: 6 июня 2008 года
Официальный сайт: masseffect.bioware.com
Официальный русский сайт Mass Effect

— Игра скачанная/купленная пиратка и в ней не работает Галактическая карта и вместо неё черный экран. Что делать?
— Купить лицензию, либо найти новый кряк, это проблема пиратской версии игры.

— Где находятся сохранения игры?
— (ХР) C:\Documents and Settings\. \Мои документы\BioWare\Mass Effect\Save

— Поддерживает ли игра геймпады?
— Официально игра их не поддерживает. Можно попробовать подключить его через сторонние программы, либо попробовать способ, который приведен ниже:

— Вылетает с такой ошибкой, что можно сделать?

— Следует обновить библиотеки Microsft Visual C++

— При запуске вылетает такая ошибка: «Warning, Shader compile error: error X3501: ‘SM2Main’: entrypoint not found».
— Ваша видеокарта не поддерживает требуемую игрой версию пиксельных шейдеров.

— Возникают проблемы со звуком в игре (не слышно голосов, шипит, похрипывание и т.п.)
Можно попробовать следующее:

2) Установить патч 1.02;

3) Обновить библиотеки библиотеки OpenAL до версии 6.14.0357.24 (с игрой идет более старая 6.14.0357.22):
— Скачать инсталлятор Open AL;
— установить OpenAL;
— перекинуть OpenAL32.dll из Х:\. \WINDOWS\system32 в Х:\. \Mass Effect 2\Binaries;

— У меня «Золотое Издание», установил игру с английской озвучкой и субтитрами. Как сделать на русском только текст и субтитры?
— Установлена может быть любая версия (русская или английская):
1) Открываем файл «»папка с игрой»\BioGame\Config\DefaultEngine.ini» и изменяем строку Language=RA(INT) на Language=RU
2) Копируем файл «»папка с игрой»\BioGame\CookedPC\Packages\Localised\RA\Dial og\GlobalTlk_RA.upk» в «»папка с игрой»\BioGame\CookedPC\Packages\Localised\RU\Dial og\»
3) Переименовываем полученный файл в GlobalTlk_RU.upk

— Установил себе аддон «Гибель с Небес», который шел в комплекте с патчем 1.01 (игра не «Золотое Издание). В миссии по спасению Лиары на планете Террум отсутствуют текстуры земли, что можно сделать?
— Обновить игру патчем 1.02 (размер патча 1.22 ГБ)
— Если не хотите ставить патч, то может помочь удаление файла LocalShaderCache-PC-D3D-SM3.upk из двух мест:

— Обновление убирает систему защиты игры и позволяет играть без диска;

— Размер патча, обусловлен тем, что системой защиты от копирования был зашифрован не только экзешник, а еще и часть игровых ресурсов (весь звук). Т.к. в патче защита снята, то он обновляет часть ресурсов игры, новыми данными, не зашифрованными Старфорсом, отсюда и такой его размер;

— Патч содержит в себе также поправленный аддон «Гибель с Небес» (не будут глюков с текстурами на планете Террум (миссия по спасению Лиары);

— Список изменений, вносимый патчем в игру, аналогичен списку патча v1.02 для «Mass Effect: Золотое издание».

Разное:
— Установив драйвер GeForce 182.06 и выше, можно исправить ошибку, при которой у владельцев видеокарт NVIDIA GeForce 8xxx выводилось сообщение General Protection Fault при запуске игры.
Прежде чем играть в Mass Effect, удостоверьтесь, что на вашем компьютере установлены драйверы последних версий.

всем кому надо чтобы игра шла без диска

1. rapidshare.de/files/39740882/ME1C_Crack_Kit.rar.html (300мб)
2. rapidshare.de/files/39740892/ME1C_Crack_Kit.r00.html (300мб)
3. rapidshare.com/files/122932400/ME1C_Crack_Kit.r01 (100мб)

Эта опция открываеся какой-то клавишей. не помню какой. По-тыкай там.

Источник