Pixelview pv bt878p fm rc driver windows 7
Pixelview pv bt878p fm rc driver windows 7
Post by CosmoGuy » January 4th, 2013, 9:31 am
As in topic. I need help in this.
Why? Windows cut support at Windows Vista. And i mean older PCI cards [non PCI-E].
I have PixelView BT878 P+ Rev. 9D. Fine card, but runs only under WinXP. I don'[t want to install it again [and I don’t have free space for it, free hdd or PC].
Re: TV car BT878 P+ and drivers for Windows 7 64bit
Post by Shadow » January 4th, 2013, 1:30 pm
Windows 64-bit does not work at all with any of the PlayStation 1 development software.
In all honesty, it’s a nightmare and a big problem. I can’t think of a solution for you, as to just go ahead and put a new HDD in your main desktop and boot from it running Windows XP.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21″ Sony G420, CD-R burner, 3.25″ and 5.25″ Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Re: TV car BT878 P+ and drivers for Windows 7 64bit
Post by CosmoGuy » January 4th, 2013, 9:01 pm
Re: TV card BT878 P+ and drivers for Windows 7 64bit
Post by Shadow » January 4th, 2013, 10:31 pm
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21″ Sony G420, CD-R burner, 3.25″ and 5.25″ Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Re: TV card BT878 P+ and drivers for Windows 7 64bit
Post by xdaniel » January 4th, 2013, 11:44 pm
Upside: I’ve seen a 64-bit «port» or whatever of BTWincap, an open source driver for Bt8xx-based capture cards, somewhere that’s supposed to work on 64-bit Windows Vista and 7.
Downside: I can’t remember where I’ve seen it, nor can I find it offhand, nor could I get it to work with my (IIRC) Bt848 probably Bt878-based TerraTValue. I think that build was made by some Russian guy and I found it on a Russian site, but beyond that. I have no idea.
Re: TV card BT878 P+ and drivers for Windows 7 64bit
Post by CosmoGuy » January 14th, 2013, 8:12 am
First, we need to download few files:
Capture card program:
So after those few kilobytes.
DO NOT install it. These drivers are empty [non configurated, some places are filled with default values because is template].
1) Open bt848.inf in your favorite text editor. I recommend one with marking variables, like Vim or Notepad++.
Scroll down to line like me:
You need to know of course your card’s model, tuner model, aaaand. I htink those ones are the most important.
2) Search for the token «$1» and replace it with the hex number of listing below:
3) Search for the token «$2» and replace it with the hex number of the second listing here:
If you don´t know the tuner brand/model, try a Philips first. At anytime you can use 0x00. Also, if you live in
Argentina, Paraguay or Uruguay, note that you have NTSC tuners.
4) Search for the token «$3» and replace it with the hex number 0x01 if your card has a TDA9855 on board. Else,replace with 0x00.
5) Search for the token «$4» and replace it with the hex number 0x01 if your card does NOT have a TEA5757 and is supposed to be able to tune FM radio. (Do NOT set it for Miro, Pinnacle or VHX cards).
6) Search for the token «$5» and replace it with the hex number 0x01. This is the FM stuff.
After the copy of drivers we go into:
At the end you have to see this:
Don’t forget to install [after drivers] the application called DScaler ].
After installation application welcomes you with very short configuration, select Uknown, but the best choice will be the closest model to your card. [without drivers application with its built-in drivers crashes anyway].
Click OK on all windows. If installation will be successfull you see window with blue background. That means it detects your card, and it works properly. Always you can choose between «Uknown card /
It’s cool to play games normally on it, instead of using emulator:
Thanks for reading [if someone, lol].