To install windows click ok to restart the computer

100% working Method “The computer restarted unexpectedly” in Windows 10

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Fix 1 – Using Registry

If you are right now on the error screen, just try this.

1 – On your screen just press Shift + F10 using your keyboard. A black command prompt window will come up on screen.

2 – Write regedit on it.

3 – Once the registry editor window appears, just browse to the following location using the left menu.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

4 – In the right side, just locate setup.exe.

5 – Double click on it.

6 – Now, just make sure that value data is set to 3.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

7 – Just close down the registry editor and finally restart your computer.

Fix 2 – Run Startup / Automatic Repair

Let windows automatically try to repair and fix your problem during your installation. You can try startup / automatic repair.

1 – Insert your windows 10 bootable media used for installation.

2 – Press any key to continue.

3 – On the screen given below, just choose repair your Computer.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

4 – When asked to choose an option in the next screen, just click on Troubleshoot.

6 – Now, click on Automatic Repair or Startup Repair.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Fix 3 – Format your hard drive

Warning: This method will delete all your data including files as well as settings on your windows 10 PC.

1. Just press Shift + F10 on your keyboard to open command prompt window on the screen.

2. Now, just write down the commands given below one by one and keep hitting enter key to execute them.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

3. Write exit and hit Enter to exit the Command Prompt window.

4. just reboot your computer

5. Now, try to install windows again.

Fix 4 – Check your hard disk cables

sometimes the error stating “The computer restarted unexpectedly or encountered an unexpected error loop” occurs due to faulty connection via hard disk cables. Check the cable connecting hard drive to motherboard and try to refix it. It fixed the problem in most cases like this.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Saurav is associated with IT industry and computers for more than a decade and is writing on The Geek Page on topics revolving on windows 10 and softwares.

Источник

Ошибка установки Windows 10: Компьютер неожиданно перезагрузился или возникла непредвиденная ошибка

При установке Windows 10 можно столкнуться с ситуацией, когда компьютер непредвиденно перезагружается. Это, как правило происходит после первой запланированной перезагрузки в процессе подготовки оборудования, то есть на каком-то проценте отсчета система уходит в ребут.

При следующем запуске вместо продолжения инсталляции ОС выводится окошко с сообщением:

Компьютер неожиданно перезагрузился, или возникла непредвиденная ошибка. Невозможно продолжить установку Windows. Чтобы установить Windows нажмите кнопку «ОК» для перезагрузки компьютера, а затем перезапустите установку.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

В английской версии установщика выглядит так:

The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click “OK” to restart the computer, and then restart the installation.

Вы должны понимать, что проблема в аппаратной части компьютера/ноутбука/моноблока, а не в загрузочной флешке, так как она не используется после первой запланированной перезагрузки. Поэтому не тратьте время меняя образы и версии виндовс или на повторную установку, итог будет тот же.

Решение

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Теперь процесс подготовки оборудования будет пропущен, и вы сможете завершить установку Windows 10. Однако, после завершения инсталляции рекомендую открыть Диспетчер устройств и посмотреть какой из компонентов подсвечен ошибкой в форме треугольника, возможно, один из них потенциальный виновник.

На всякий случай создайте контрольную точку для восстановления системы и начните установку драйверов. Обратите внимание, на устанавливаемый драйвер, в процессе которого компьютер уходит в ребут. Рекомендую не мучиться с установкой драйверов на это устройство, а просто отключить его, кликнув правой кнопкой мыши по оборудованию и выбрав “ Отключить “. В будущем это предотвратит самостоятельные перезагрузки в случае обновления драйверов.

Айтишник

Специалист по ремонту ноутбуков и компьютеров, настройке сетей и оргтехники, установке программного обеспечения и его наладке. Опыт работы в профессиональной сфере 9 лет.

Источник

Блог Сисадмина

Полезная информация об администрировании пользовательских и серверных ОС Windows.

(РЕШЕНО) Ошибка при установке Windows 7

При установке Windows 7 с родного дистрибутива на абсолютно чистый свежеразмеченный диск на последнем этапе компьютер вываливается в синий экран и затем показывает сообщение:

Компьютер неожиданно перезагрузился или возникла непредвиденная ошибка. Невозможно продолжить установку Windows. Чтобы установить Windows нажмите кнопку «ОК» для перезагрузки компьютера, а затем перезапустите установку.

The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows click OK to restart the computer and then restart the installation.

Решается следующим образом:

На этом окне с ошибкой нажимаем Shift-F10, откроется командная строка. Запускаем regedit.

Идем сюда: HKLM-System-Setup-Status-ChildCompletion

Там есть ключ с названием setup.exe. Если у него значение 1, то меняем его на 3. После этого закрываем редактор реестра, перезагружаемся, и установка завершается нормально.

Примечание: Здесь описано то, что помогло лично мне и многим другим людям, которые прочитали эту статью. Но! Все что вы делаете, вы делаете на свой страх и риск. Не надо писать мне претензии что у вас все сломалось, стало еще хуже, начались перезагрузки и т.п. Всем удачи!

(РЕШЕНО) Ошибка при установке Windows 7 : 116 комментариев

Большое спасибо, помогло! А то уже собирался жесткий выковыривать)))

Уважение к таким специалистам не передать!

Огромнейшее спасибо. Помогло.

Спасибо огромное. Сутки потрачены на поиск решения.

Большое спасибо! Очень выручили. Нужно было восстановить ОС установкой поверх и выскочила такая ошибка на финальном этапе установки. Спасибо!

Огромное спасибо. Очень помогло.Долго возился! Lenovo G50-30

блин большое спасибо очень долго решал эту задачу думал на жесткий диск!

А у меня нет нет папки HKLM

там всего 4 папки, так что ищи среди них нужную. у меня тоже не было HKML, но нашел среди тех, что были. Все заработало прекрасно, это просто чудо! Спасибо огромное просто.

А если у меня планшет

Плин, пол дня голову ломал!
J0seph Red ПСБ тебе и тому кто пост скопировал

Сделал как написанно в итоге окно это исчезло но постоянно комп перезапускается я даже в биос не могу зайти ХЭЛП!?

Благодарю, несомненно полезный материал!

Огромное спасибо. Помогло. Таких статей …она единственная полезная оказалась.

Огромное спасибо, только у Вас нашла ответ на свой вопрос. Мучаюсь два дня. А решение простое.

Вы решили эту проблему?

Потрясающе! Очень помог 🙂
Коротко, ясно и по делу!

Кстати, после проделанной операции прошел первый запуск ПК, загрузился рабочий стол, после чего синий экран(0x0000007e) и ноутбук ушел в перезагрузку.
После этого зашел в безопасном режиме и установил значение setup.exe обратно=1. Перезагрузка. Вуаля! Все работает.
Скажите кому такое дополнение помогло.
P.S. Изначально при установке Windows 7 на финальном этапе загорался синий экран(0x0000007e) после этого при перезагрузке как и у автора сообщение: «Компьютер неожиданно перезагрузился … «.
Ноутбук Lenovo B590.

У меня ноутбук при загрузке на 64% просто перезагружается без конца

Напишите поподробнее для чайников плз как это «идем сюда: HKLM-System-Setup-Status-ChildCompetion» как в реестре найти эту строку? пробовал Ctrl+f не находит это значение..

HKLM значит HKEY_LOCAL_MACHINE
дальше вроде должно быть понятно? 🙂

В Windows7 реестр выглядит так: HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\ChildCompletion
Но у меня итак было значение 3… Винду не установить. Форматнул жёсткий диск, пробовал установить и семёрку и XP и резет биоса — результат один. Во время установки, после первой перезагрузки неизменно выскакивает ошибка.
Посоветуйте пожалуйста что-нибудь.

у меня нет папки HKLM-System-Setup-Status-ChildCompetion

спасибо, очень помогли!

Спасибо помогли. Интересно из за чего так получается, ещё ни разу раньше такого не встречал

Спасибо огромное за статью! Ноутбук lenovo g570, на последнем этапе установки появлялась эта ошибка, весь вечер мучалась, пока не нашла ваш сайт, спасибо еще раз!

Огромное спасибо, без вас бы не справился

Спасибо тебе большое.

Огромное спасибо за подсказку

Очень полезная тема. При первоначальной настройке ОС на новом компьютере(DEXP, Windows 10) был сбой по питанию. Решение помогло, спасибо.

Спасибо огромное. Очень помогло!

Я тебя готов расцеловать))))Спасибо))))))

Ох ты хосспади.. Где ж я был раньше… Спасибо огроооооооомнейше.
Столько я раз с проблемой сталкивался…

Огромное спасибо!
У меня данное сообщение вываливалось при установке любой 64-битной винды. При этом 32-битная ставилась без проблем. Уже почти смирился с установкой Win10(x86). Но теперь без компромиссов поставил х64!
Ещё раз благодарю!

спасибо те мил человек, помогло, а то 3й день пошол……
сообщение вываливалось при попытке востановить винду…

Дружище!От души тебе огромное СПАСИБО. Реально всё перепробывал,мозг сломал уже.И тут твоя статья.Дай Бог тебе здоровья.В моём случае всё это происходило при установке windows 10.Сработало!

Автор помог очень, спасибо!

Бл***********отдуши спасибо красавчики молодцы респек ваше от души крч помогло

Огромное спасибо! Только это и помогло. Остальные не то советывали.

Спасибо огромное, помогло

Нету папки ChildCompetion что делать?

Блин, как я испугался, другу решил помочь переустановить винду на какую нибудь нормальную, но по среди установки ноут непроизвольно вырубился и дальше то же, что и у всех

Мужик, ты просто Бог. Люблю тебя. Но хочу добавить: чтобы было проще при открытии редактора реестра нажмите Ctrl+F и пишем ChildCompletion. Это и для тех у кого вместо HKLM написано HKEY. Кароче все делаем по инструкции и радуемся жизни) Автор, выкладывайте на пикабу. )))) лафффки тебя*

РЕБЯТА ДЛЯ ТЕХ У КОГО НЕТУ HKLM открываем HKEY_Local_Mashine как то так! Способ рабочий!

Спасибо огромное, все решено.

Ничего не решено! Как и было описано выше, комп начал постоянно перезагружаться. со спасибами закончили, а ибо не за что. Давайте решение, чудо программеры мля

Ну что,решилась эта проблема?у меня та-же фигня!

Спасибо,на 8-её папку не сразу нашёл,но и не долго искал))

Спасибо огромное
Помогли очень

Непревиденная ошибка программы установки Windows. Чтобы установить Windows, перезапустите программу установки.
Что делать? Моя виндовс 10, виндовс 7 скачал из инета

не помогло:
бесконечная перезагрузка после данных действий — как решить, что делать?

У меня Lenovo G50, воткнул Win7 вместо стоковой 8.1, тоже не доустанавливалась. Посоветовали сменить в биосе тип контроллера USB с 3.0 на 2.0 (было написано «потом поменяем обратно») и система поставилась без проблем. Теперь она грузится и работает, но когда ставлю обратно 3.0 — слетает как и тогда. 0х000000Е7. Пока вот два дня живу без USB 3.0, ищу шаманские рецепты…

Спасибо большое помогло

Спасибо большое! Помогло.

огромное спасибо, бро!

Что делать, если значение равно не (1), а (0)?

Спасибо огромное! Я очень благодарен вам.

Шаман однако! Все заработало

Спасибо за подсказку. Три раза пытался установить, в пустую. Поменял цифру 1 на 3 и проблема исчезла.

Спасибо. На вин 10 получилось

Столкнулся с такой же проблемой. Увы, нажатие Shift и F10 ничего не открывают… И всё по новой…(
ноутбук hp envy m6

Огромнейшее спасибо. Уже начиналась паника))) СПАСИБО

А если уже стоит 3

Большое спасибо. нереально огромное спасибо)

Блин выручили очень огромное спасибо побольше бы таких знающих людей

РАЙ НАШЕМУ СПАСИТЕЛЮ!!)

По началу не верил что поможет, но попробовав виндовс продолжил установку!! Спасибо админам!

Что делать если компьютер включается показывает 64 а потом выключаешься? И так постоянно?

Стандартно левый Alt-Shift… может клавиатуру другую попробовать?

Спасибо брат, огромное за помощь!!

О ГОСПОДИ! Два дня мучался, не мог понять в чём дело! Спасибо огромное!

Спасибо огромное. Мучалась месяц! Спасибо,спасибо,спасибоооо.

Поменял значение с 1 на 3, стала виснуть на 64%
Не могу зайти в безопасном режиме и открыть командную строку что бы поменять значение назад. Незнаю что делать

Спасибо автору за пост, помогло.

При нажатии shift f10 не происходит никаких действий

Та же проблема, что и сверху — теперь бесконечная загрузка. На это никто годами не отвечает, и мне очевидно не ответят. Спасибо, чо

Доходит до установки виндовс 64% и перезагружается. Как исправить?

У меня ноутбук и при ошибке почемуто перестала работать клавиатура и я не могу нажать shift+f10
Что мне делать?

Ка к изменить раскладку Клавы на английский, она просто не реагирует на сочетание вин+пробел?

Спасибо за статью, первый раз столкнулся и решение это помогло.

Перезагружает на 64% что делать?как исправить?

Спасиьо вам большое, я два харда поменял но ни как вот ваш совет помок честно вы молодцом.

храни тебя господь чувак! Ставлю семерку на xen уже раз в 20й, поменял настройки xen уже миллион раз, всю голову сломал, думал, что проблема в xen. Уж уж эти форточки, всю душу высосали

Как нажать я делаю не помогает.
Нажимаю Shift + F10
Не помогло

Источник

How to fix «The computer restarted unexpectedly» error in Windows 10?

Issue: How to fix «The computer restarted unexpectedly» error in Windows 10?

I tried installing Windows 10 on one my laptop. When the PC loads, “The computer restarted unexpectedly” message pops up and it freezes while loading. The error appears each time when I restart the system. I’m out of options. Where might the problem possibly be? Thanks in advance.

“The computer restarted unexpectedly” error occurs not only in Windows 10 but also in previous versions Windows 7, 8, etc. A Windows user has reported in a Microsoft forum, that this problem appears after System Startup on Windows 7 Recovery. [1] Each case is individual, so there are many theories about the cause of this error. Interrupted power supply might have triggered the phenomenon.

Otherwise, it is likely that if attempted to install the Windows iso file, which was downloaded from questionable sources, the corrupted files might prevent you from upgrading to Windows 10. Furthermore, “The computer restarted unexpectedly” error can also be caused by simple problems such as corruption of the hard disk or some system files.

However, there are some simple solutions that might help you to fix “The computer restarted unexpectedly or encountered an unexpected error” on your Windows device. Take a look at the below-provided instructions that were created by our security experts. Go through all the methods until you find a successful one.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computerFix «The computer restarted unexpectedly»

How to fix “The computer restarted unexpectedly” error in Windows 10?

Option 1. Run Registry Editor

If you have been looking for a way how to take care of “The computer restarted unexpectedly or encountered an unexpected error” problem on your Windows computer, you should try completing the following guidelines:

Option 2. Perform a Clean Boot to identify problems

If you encounter temporal or recurring unidentifiable errors, there is an option of the clean boot. It works only in the case when you can fully access the operating system. Here is a guide how to run it:

Note. To revert changes, uncheck Load System Services in the General tab. Complete the action by applying the changes.

Option 3. Manage your BIOS settings

According to research, BIOS [2] is an important part of your computer system that is responsible for various settings in it. If the BIOS is not managed properly, this might be the reason why you are receiving the computer restarted unexpectedly or encountered an unexpected error on your Windows device. Some good news is that you might be able to change things by completing the several following steps:

Option 4. Create and use a recovery drive

For those who have been encountering the computer restarted unexpectedly or encountered an unexpected error lately, this method might appear helpful. If you already have a recovery drive, you can already start with the second part. If you do not have one, here are the instructions on how you can create it:

When you have finished this section, proceed with the following steps. Also, those who already employ a recovery drive, can go straight for the below-provided instructions too:

Источник

How to Fix The Computer Restarted Unexpectedly Loop in Windows 10

Getting Computer restarted unexpectedly or encountered an unexpected error While Installing or Upgrading to Windows 10 1809? This is a Common issue Many Windows users are reporting it. Maybe you keep getting this error after clicking OK each time. You can’t proceed with the installation and you’re stuck in an endless loop. Whenever you restart your PC you will again see this error: The error is something like this:

The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click “OK” to restart the computer, and then restart the installation.

Computer Restarted Unexpectedly Loop

There is no particular cause as to why you are facing this issue but corrupted Registry, Windows files, damaged hard disk, outdated BIOS etc are the reason among many others. But this will give you a basic idea on how to troubleshooting these various causes and that’s what exactly we are going to do.

Change ChildCompletion setup.exe value in Registry Editor

Wrong setup.exe entry value data in registry editor is the main culprit for error The Computer Restarted Unexpectedly Loop in Windows 10. So you need to correct it first. When you get this Error screen, Here on the same error screen, press Shift + F10 to open Command Prompt. Type command regedit and hit Enter key To open Windows registry editor.

Now in the Registry Editor navigate to the following key:

Computer/HKEY_LOCAL_MACHINE/SYSTEM/Setup/Status/ChildCompletion

Next, click on ChildCompletion key and then on the right-hand side window look for setup.exe. Double click on setup.exe and change its value from 1 to 3.

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Close Registry editor and command prompt window. Now click OK on the error and your PC will restart. After the PC restart, your installation will continue.

Check Hard Disk Cables

Loose Cable connection of Hard drive might cause The Computer Restarted Unexpectedly Loop in Windows 10. So check the cable that links Motherboard with the Hard drive and change when slacked. Users reported that switching the cables that connect hard drive to the motherboard fixed the issue, so you might want to try that.

Run Startup Repair

After perform above still having Computer restarted unexpectedly or encountered an unexpected error, then Access Advanced Boot options And perform Startup repair let windows to fix the startup Error itself.

Insert the Windows 10 bootable installation DVD and restart your PC. If you don’t have read how to create Windows 10 installation media here. When you ready with the installation DVD / USB insert it and restart windows. ( Access BIOS setup by press Del key and change the Boot order First boot as DVD / Removable drive.)

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Wait till the Windows Automatic/Startup Repairs complete. Restart and you have successfully Fix The computer restarted unexpectedly or encountered an unexpected error, Now again install windows check this time its successful.

Format Disk Drive

If All Above methods fail to fix this error, Then the simply last way to format the drive with NTFS file system using command prompt And perform Clean installation.

Note: This method will remove all your files, folders and settings from your PC.

Again open the Command Prompt by pressing the Shift + F10 key on the error screen. Now type the following command in cmd and hit Enter after each one:

To install windows click ok to restart the computer. Смотреть фото To install windows click ok to restart the computer. Смотреть картинку To install windows click ok to restart the computer. Картинка про To install windows click ok to restart the computer. Фото To install windows click ok to restart the computer

Type exit and press Enter to exit Command Prompt. After you restart your computer problem with “The computer restarted unexpectedly” loop should be fixed. But you have to install Windows again.

The computer restarts itself no matter what you do and you can’t really proceed with the installation. This error arises mainly because of some installation mistakes or mishaps. you should check your hard drive cable connection because on certain occasions this creates the loop problem. Did these solutions help to fix “The Computer Restarted Unexpectedly Loop” in Windows 10? Let us know on comments below, also read:

Источник

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *